10 Checklist for Maintaining Reverse Osmosis System
The other name of water is life. It gives life to humans, animals, and plants as well. But, do you know, purified water can enhance crop production by 67%? Yes, researchers from Texas A&M University showed that purified water plays a pivotal role in crop yield.
But, how could you ensure purified water in 2022?
Water pollutions are the consequence of present problems. The example of which is the ever-rising industrial wastage, effect of intense population, throwing factorial chemicals on water bodies, etc.
But, modern problems also have modern solutions that come with the introduction of RO technology.
You can unlimitedly be benefitted from this expensive water treatment which will need regular maintenance for its performance and longevity.
With that being said, we came with ten such checklists for the maintenance of your OR system for the best of its use!
How to Maintain a Reverse Osmosis System: 10 Checklist to Follow
Now, I will discuss ten core features to look for in a reverse osmosis system. You can have a guarantee of a sustainable RO unit if you can acknowledge these criteria properly.
#1. Test of the RO purified water
To keep your reverse osmosis system, you need first to identify whether the quality of the purified water is good or not. And, the best way to do this is by checking the electrical conductivity of the water.
Actually, pure and fresh drinking water is hard to conduct electricity. As a result, if electric conductivity doesn’t occur, your water quality can be marked as better.
If electrical conductivity occurs, ions, salts, acids, and bases are high in such kinds of water. Therefore, electricity passes through water mainly due to these substances. In such a case, maintenance of your RO should be done.
#2. Testing the level of alkalinity and chlorine
RO purifiers remove a level of chlorine ions up to a certain extent. Therefore, if your water is softer, it should be interpreted that the system is working and removing the chlorine ions, making water hard.
Water becomes hard to a certain level due to chloride ions removable by a RO system. But, you cannot expect the removal of such items as magnesium and calcium, which are the prime reason for water hardness.
Again, the alkalinity should also be checked for proper maintenance. The pH level should be balanced, which cannot be accepted if a number is greater than 7. A neutral pH level is the best yield in this case.
#3. Note the RO water temperature, flow rate, and pump pressure
Maintenance should also be done in terms of the water temperature. This factor has a very crucial effect in the case of your OR system. An ideal temperature should try to be maintained all the time.
With the increase in temperature, the rate of flow of the product also increases. But, again, when the temperature is minor, the rate of flow also becomes lesser.
The pump pressure can also be indicated by the rate of flow of the product. That is to say, if the pressure in the pump is more, the flow rate will also be higher. And the same occurs in the opposite case.
#4. Timer setting for water softener and pre-filters
In the name of maintenance, one should also ensure the perfect timing for running the water softener and pre-filters. They both can generally be run at the exact timing.
The timing depends on the level of hardness. If the water hardness ranged from 0 to 20 grains, the timing should be thrice a week. If the range is 21-25, the water softener should run four times a week. For 26-30 grains, five times will be enough.
In that way, if the hardness grains reach 36 or more, the system should be run every single day of the week.
#5. Logging the water flow rate
The water flow rate should be logged during the cleaning and maintenance session of your reverse osmosis system. In this way, the filter can easily be cleaned without any interruption.
If water is not clogged, the running water will hamper your cleaning procedure and impact the maintenance.
#6. Testing the flow rates and wastewater of RO
The present water flow rate should be compared with the newly bought Ro system. If there remains a difference between the two rates, special precautions should be taken.
You need to know the ideal flow rates for the comparison, ranging from 40-100 psi. If the rate is less than this number, you should be ready for your system’s maintenance.
Again, a RO system at this rate provides 75-100 gallons of water daily. The difference between this range and the output is the waste of water that can occur in a RO.
#7. Change of the pre-filters
One of the most essential and mandatory parts of the reverse osmosis system is the changing of pre-filters. This is an annual budget that individuals need to fix at the time of their purchasing.
Every year, you need to change the filter, which is compulsory. They are designed in such a way that they get expired annually. They also have valid reasons for their expiry as they are entangled with various impurities and filtrate.
#8. The semi-permeable membrane should be designed
In a RO system of water filtering, it is primarily done through osmosis. This process is generally seen in plants during the soil’s absorption of water and minerals by their roots.
As the roots of the plants contain a semi-permeable membrane, osmosis takes place in them, which makes them take water most purely.
The very same occurs in the case of a RO. With this same principle, a RO system filters the water through their semi-permeable membrane. So special care should be taken of this substance during the maintenance.
#9. Checking the pressure gauge reading
A pressure gauge is needed the most to deal with the tubing valve. They are used to drain out the water from filters.
For this, an ordinary gauge can not be used. The readings of the pressure should be lower in terms of the indicator. That is to say; a lower gauge is required to turn off the valve and stop water from flowing.
#10. Assisting the RO system with water softener
A water softener also contributes to the life and maintenance of your RO system. That is because of many performances that can only be carried with the combination of both of them.
A water softener can assist your RO by fulfilling the job, which cannot be done using a RO system. For example, if the water in your area comes in a complex and impure form, you cannot depend on only one of these processes.
The main softening of the water can only be done by removing minerals like calcium and magnesium. This is because they are the main reason for water hardness that can only be treated with a water softener.
As a result, it decreases a certain pressure from your RO, which adds to its life because reverse osmosis can only soften the water ton specific reasons cost by salt, ions, and other such minerals and impurities.
The main task of a RO system is to remove unwanted particles from the water and make it impurity-free. And a water softener will add to this work of the RO system by letting it focus on its section.
Purified water plays a crucial role in gardening; one must take necessary care of the unit. If you take regular care, it will provide flawless water, and the unit will serve longer.